Photonicat 刷Modem模块固件：修订间差异
跳到导航
跳到搜索
Guangyingmao（讨论 | 贡献） |
Guangyingmao（讨论 | 贡献） |
||
| 第3行： | 第3行： | ||
Please DON'T POWER OFF the device during the firmware updating! And make sure your device has plugged-in and has enough battery (above 50%). Use linux terminal(TTYD) to finish | Please DON'T POWER OFF the device during the firmware updating! And make sure your device has plugged-in and has enough battery (above 50%). Use linux terminal(TTYD) to finish | ||
===4G 模块：Quectel | ===4G 模块：Quectel EM05CE=== | ||
cd /tmp | cd /tmp | ||
wget https://dl.photonicat.com/firmware/Quectel-EM05-update.tar.gz | wget https://dl.photonicat.com/firmware/Quectel-EM05-update.tar.gz | ||
| 第9行： | 第9行： | ||
cd Quectel-EM05-update | cd Quectel-EM05-update | ||
./update.sh | ./update.sh | ||
===5G 模块：Quectel RM500UCN=== | ===5G 模块：Quectel RM500UCN=== | ||
2025年6月24日 (二) 15:59的最新版本
Modem 固件更新 Firmware Update
刷固件时，请保持电量充足>50%，并插入充电器。用Linux 终端方式或网页TTYD进行一下操作.
Please DON'T POWER OFF the device during the firmware updating! And make sure your device has plugged-in and has enough battery (above 50%). Use linux terminal(TTYD) to finish
4G 模块：Quectel EM05CE
cd /tmp wget https://dl.photonicat.com/firmware/Quectel-EM05-update.tar.gz tar -xzf Quectel-EM05-update.tar.gz cd Quectel-EM05-update ./update.sh
5G 模块：Quectel RM500UCN
cd /tmp wget https://dl.photonicat.com/firmware/RM500U-update.tar.gz tar -xzf RM500U-update.tar.gz cd RM500U-update ./update.sh
注意注意
！！！目前仅限官方版本，请注意查看具体的对应型号，用户自行购买的模块，由于模块渠道和硬件版本可能变砖，我们不负任何责任，请谨慎操作！！！