Photonicat 刷Modem模块固件

来自光影猫知识库
Guangyingmao讨论 | 贡献2023年2月11日 (六) 00:33的版本 (创建页面,内容为“=Modem 固件更新 Firmware Update= 刷固件时,请保持电量充足>50%,并插入充电器。用Linux 终端方式或网页TTYD进行一下操作.</br> Please DON'T POWER OFF the device during the firmware updating! And make sure your device has plugged-in and has enough battery (above 50%). Use linux terminal(TTYD) to finish ===4G 模块:Quectel EM05=== cd /tmp wget https://dl.photonicat.com/firmware/Quectel-EM05-update.tar.gz tar -xzf Quectel-EM…”)
(差异) ←上一版本 | 最后版本 (差异) | 下一版本→ (差异)
跳到导航 跳到搜索

Modem 固件更新 Firmware Update

刷固件时,请保持电量充足>50%,并插入充电器。用Linux 终端方式或网页TTYD进行一下操作.
Please DON'T POWER OFF the device during the firmware updating! And make sure your device has plugged-in and has enough battery (above 50%). Use linux terminal(TTYD) to finish

4G 模块:Quectel EM05

cd /tmp
wget https://dl.photonicat.com/firmware/Quectel-EM05-update.tar.gz
tar -xzf Quectel-EM05-update.tar.gz
cd Quectel-EM05-update
./update.sh


5G 模块:Quectel RM500U

cd /tmp
wget https://dl.photonicat.com/firmware/RM500U-update.tar.gz
tar -xzf RM500U-update.tar.gz
cd RM500U-update
./update.sh

注意注意

!!!目前仅限官方版本,用户自行购买的模块,由于模块渠道和硬件版本可能变砖,我们不负任何责任,请谨慎操作!!!